top of page
  • Aira Euro Automation

Wafer Type Butterfly Valve: The Ultimate Guide

If you're looking for a reliable, efficient, and cost-effective valve, then a wafer type butterfly valve is perfect for you. In this guide, we'll cover everything you need to know about wafer type butterfly valves, including their advantages, design, and why they're perfect for a variety of applications.



Define a wafer type butterfly valve

A wafer type butterfly valve is a quarter-turn rotational valve that is used to control the flow of liquids and gases. It consists of a circular disc with a hole in the centre that is attached to a stem. The disc is connected to the stem via two or three hinges. The stem is connected to a handle that is used to rotate the disc.

The disc of a wafer type butterfly valve can be made from a variety of materials, including metal, plastic, or composite. The most common material for the disc is metal, as it is strong and durable. The metal discs are usually coated with a layer of plastic or composite to prevent corrosion.

The hole in the centre of the disc is called the bore. The bore determines the size of the valve and the amount of liquid or gas that can flow through it. The larger the bore, the more liquid or gas that can flow through the valve.

The hinges on a wafer type butterfly valve allow the disc to rotate around the stem. The number of hinges depends on the size and weight of the disc. Heavy discs require more hinges for support.

The handle on a wafer type butterfly valve is used to rotate the disc and open or close the valve. The handle can be manual or automatic. Automatic handles are controlled by an actuator, which can be pneumatic, hydraulic, or electric.


List the advantages of a wafer type butterfly valve

A wafer type butterfly valve is a quarter-turn rotational valve that is used to control the flow of liquids and gases. It consists of a disc that is mounted on a shaft that passes through the body of the valve. The disc has a hole in the centre that allows fluid to pass through when the valve is in the open position. The disc is connected to the shaft by two or three hinges, and when the shaft is turned, the disc rotates and either opens or closes the hole.

The advantages of a wafer type butterfly valve over other types of valves are numerous. Firstly, it is much easier to install than other types of valves, because it does not require welding or any special tools or skills. Secondly, it is very versatile and can be used in a wide variety of applications. Thirdly, it is relatively inexpensive compared to other types of valves. Finally, it is very easy to operate and can be opened and closed with very little effort.


Understand the design of a wafer type butterfly valve

There are two main types of wafer butterfly valves: double offset and triple offset. Double offset valves have a disc that is offset from the centerline of the body, while triple offset valves have a disc that is offset from both the centerline of the body and the axis of the stem. This design gives the valve a much higher degree of sealing ability than either a single or double offset valve.

The main difference between these two types of valves is in the way they seal. Double offset valves use a metal-to-metal seal, which is held in place by bolts that go through the body and into the disc. Triple offset valves use a rubber seat that is held in place by a metal ring. This design gives the valve a much better seal, but it also makes it more expensive.

When choosing a wafer butterfly valve, it is important to consider the application in which it will be used. For example, if the valve will be used in an area where there is a lot of vibration, then a triple offset valve would be a better choice because it has a more secure seal. If cost is more important than performance, then a double offset valve would be the better choice.

Why a wafer type butterfly valve is perfect for you

There are many reasons why a wafer type butterfly valve might be the perfect choice for you. Here are just a few:

  • Wafer butterfly valves are much easier to install than other types of valves. This is because they do not require welding or any special tools or skills.

  • Wafer butterfly valves are very versatile and can be used in a wide variety of applications.

  • Wafer butterfly valves are relatively inexpensive compared to other types of valves.

  • Wafer butterfly valves are very easy to operate and can be opened and closed with very little effort.

  • Wafer butterfly valves have a high degree of sealing ability, which makes them ideal for use in areas where there is a lot of vibration.

2 views0 comments
Post: Blog2_Post
bottom of page